How Often Should You Maintain a Water Heater?

Quick Summary

Water heater maintenance should be done once a year. The yearly routine includes setting the thermostat to 120°F, flushing the tank, testing the T&P relief valve, checking the anode rod, and looking for leaks and corrosion.

  • Set the thermostat to 120°F, which is safe for most homes and cuts scalding risk.
  • Drain a few gallons through the drain valve to clear sediment buildup.
  • Lift the T&P relief valve lever briefly; water should flow, then stop cleanly.
  • Replace the anode rod if it is mostly bare steel, since hard water wears it out faster.
  • Never work on a gas unit without turning off the gas supply first.

Table of Contents

Water Heater Maintenance Checklist: Steps to Follow Each Year

Last Updated: November 17, 2026

Most homeowners forget their water heater until the hot water runs cold. A simple yearly check can prevent that. Water heater maintenance is mostly routine work, and you can do much of it yourself.

Homeowner using a garden hose to flush sediment from a tank during water heater maintenance
Homeowner using a garden hose to flush sediment from a tank during water heater maintenance

Work through these steps once a year:

  • Turn the thermostat to 120°F. This setting is safe for most homes and cuts scalding risk.
  • Flush the tank. Drain a few gallons through the drain valve to clear sediment buildup.
  • Test the T&P relief valve. Lift the lever briefly. Water should flow, then stop cleanly.
  • Check the anode rod. Replace it if it is mostly bare steel. Hard water wears it out faster. Read how hard water damages a water heater tank to see what to watch for.
  • Look for leaks and corrosion. Check the fittings, the base, and the shut-off valves.

Watch out: never work on a gas unit without turning off the gas supply first, and never flush a tank that is still hot.

The yearly checklist breaks down into five routine steps, each with a clear action.

Step What to do Frequency or setting
Thermostat Set the thermostat 120°F
Flush the tank Drain a few gallons through the drain valve Yearly
T&P relief valve Lift the lever briefly and check flow Yearly
Anode rod Replace if mostly bare steel Check yearly
Leaks and corrosion Inspect fittings, base, and shut-off valves Yearly

Gas Water Heater Maintenance and Electric Water Heater Maintenance Checklist

Gas and electric units need different checks. A gas unit needs a look at the burner and the venting. Make sure the flue is clear and the pilot flame burns blue. An electric unit needs a look at the heating elements and the breaker. You can compare gas and electric water heaters to see whether your current type still fits your needs. Turn off the breaker before you touch any element.

Both types benefit from the same flush and the same T&P test. Keep a short written log so you know when each task was last done.

What Water Heater Maintenance Costs and When to Call a Plumber

Pricing for professional service depends on the unit, the fault, and the work involved. Contact City Plumbing & Rooter AZ LLC for current pricing or a quote on a specific job.

Call a professional when you see any of these signs:

  • Water that is rusty or smells like rotten eggs
  • Leaks around the tank or fittings
  • A T&P valve that drips or will not seal
  • Popping or rumbling noises from sediment

For water heater service, book a water heater replacement or service visit with our team, or find a water heater repair near you if the unit is failing.

Frequently Asked Questions

What is proper maintenance for a water heater?

Proper water heater maintenance includes flushing the tank once a year to remove sediment, inspecting or replacing the sacrificial anode rod every few years, testing the temperature and pressure (T&P) relief valve, checking for leaks and corrosion around fittings, and confirming the thermostat is set to a safe, efficient temperature. Gas units also need the burner and pilot light checked, while electric units need the heating elements tested. Hard water areas, including much of Arizona, typically need flushing more often because mineral deposits build up faster.

How often should you flush a water heater?

Most manufacturers and plumbers recommend flushing a tank water heater at least once a year. In areas with hard water, flushing every six months can prevent sediment buildup that reduces efficiency and shortens service life. Tankless units do not store water in a tank, so they are not flushed the same way. They instead need periodic descaling, which a licensed plumber can perform.

When should you call a plumber for water heater maintenance?

Call a licensed plumber if you notice rusty or discolored water, popping or rumbling noises from sediment, water pooling around the base, a T&P valve that drips or will not reseat, or inconsistent hot water temperatures. Any gas odor or a burner that will not stay lit should be addressed immediately. Contact the company directly for current pricing or to schedule a quote, since costs depend on the unit and the work required.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top